Edison Opto Corporation launched an energy efficient lamp for large area lighting – 150W LED high bay which provides high brightness and superior light quality. The light source of 150W LED high bay is Edison Opto’s high brightness Federal 3535 Series component. The 150W high bay is composed of many LED emitters and its appearance is similar to traditional high bay lighting, but it has higher efficacy. Under 3200mA, the 150W high bay can reach 12000lm. Besides, the 150W high bay has the advantages of energy efficiency, long life time and easy installation which can replace 400W mercury vapor lamp or 250W HPS (high pressure sodium). Meanwhile, it can help customers to save the maintenance costs and the power consumption. Edison 150W high bay now provides two angles (70° and 140°) which can satisfy various application demands. The 70° AL reflector high bay is suitable for factory, parking lots, gymnasiums and other large spaces. The 140° floodlight uses PC reflector to change the light structure and widen the range of lighting which can be applied in large outlet and indoor lighting.

Edison Opto Corporation has been developing the products which fit the market demand and environment protection actively since their establishment. Recently, Edison Opto has successfully developed the high cost-performance ratio product-Edixeon C Series, and showed their sophisticated R&D capability. The Edixeon C Series are available in cool white and warm white. Featuring high luminous efficacy, the Edixeon C Series can reach 135 lm/w @350mA. Edixeon C Series have become the high cost-performance ratio products in the market. Under the great performance, the Edixeon C Series provide CRI 70 in Cool White and more than 80 in Warm White. Besides, Edixeon C Series are designed by particular package for reflow process application which can accelerate the speed of manufacturing process. Unlike fluorescent and incandescent light sources, Edixeon C Series contain no mercury and have more energy efficient. In lighting applications, the Edixeon C Series are designed to satisfy Solid-State lighting High Power LED applications such as indoor lighting. Besides, the Edixeon C Series can be used as the light source of spot lights and TD down lights which can be applied in hotels and restaurants. The introduction of Edixeon C Series sets up a high standard in the market and shows Edison Opto’s sophisticated R&D capability.

Edison Opto Corporation has successfully developed a novel technology which provides high performance, high luminous flux and high CRI into HR series products. Besides, Edison Opto has introduced the products which are referred to the specifications of Zhaga-EdiLex Spot Light Module (SLM). The latest LED products of Edison Opto will be showcased at Guangzhou International Lighting Fair 2012. In order to enable the interchangeability of LED light sources made by different manufacturers, Zhaga has defined interfaces for a variety of application-specific light engines. Zhaga was established to benefit consumers and professional buyers of light engines and luminaries, because interchangeability will prevent market fragmentation into incompatible products. Edison Opto has taken the standards of Zhaga into consideration, and introduced the products which are referred to the specifications of Zhaga-EdiLex Spot Light Module (SLM). EdiLex Spot Light Module(SLM) use EdiPower II 8W~25W which are high brightness LEDs. With specially designed holder and reflector, each EdiLex Spot Light Module(SLM) can be assembled into heat sink and lighting fixture, suitable in applications like down lights, truck lights, spot lights, etc. Introducing the products which are referred to the specifications of Zhaga brings Edison Opto products to become more popular. Besides, the process of new products launch is expected to shorten. Edison Opto will continually develop the products which are referred to the specifications of Zhaga.