Last ¥3,320 JPY
Change Today +60.00 / 1.84%
Volume 36.9K
7631 On Other Exchanges
As of 2:00 AM 07/24/14 All times are local (Market data is delayed by at least 15 minutes).

macnica inc (7631) Snapshot

Previous Close
Day High
Day Low
52 Week High
07/8/14 - ¥3,515
52 Week Low
07/24/13 - ¥2,272
Market Cap
Average Volume 10 Days
Shares Outstanding
Dividend Yield
Current Stock Chart for MACNICA INC (7631)

Related News

No related news articles were found.

macnica inc (7631) Related Businessweek News

No Related Businessweek News Found

macnica inc (7631) Details

Macnica, Inc., together with its subsidiaries, provides semiconductor components, electronic devices, and network equipment and software primarily to electrical and electronics manufacturers in Japan and internationally. It develops, processes, imports and exports, and distributes semiconductor devices and integrated circuits (IC), and electronic components, as well as electronic equipment, and its peripheral equipment and accessories. The company offers programmable logic devices for use in telecommunications equipment; application specific ICs; application specific standard products for use in communication, image data processing, and other applications; and analog ICs for use in the general field of communication, computers, office automation equipment, consumer products, and industrial equipment, as well as in power supply control in electronics. It also provides memory products, such as DRAM, which is used for the computer’s main memory and other IT applications, and flash memory that is used USB and memory cards; other standard ICs for various usages, including DSP, microcomputers, CPUs, and discrete or logic products. In addition, the company offers electronic devices comprising mechanical components, such as quartz vibrators and crystal oscillators; module products, such as sensors; and other equipment for installation, including rackmount power supplies. Further, it provides network products, such as hardware, middleware, and security products, as well as carrier solutions that support service development for mobile phones, iPhones, and next-generation networks. The company was formerly known as Japan Macnics and changed its name to Macnica, Inc. in March 1992. Macnica, Inc. was founded in 1972 and is headquartered in Yokohama, Japan.

1,827 Employees
Last Reported Date: 06/26/14
Founded in 1972

macnica inc (7631) Top Compensated Officers

No compensation data is available at this time for the top officers at this company.

Executives, Board Directors

macnica inc (7631) Key Developments

Macnica Group Announces Release of its Mpression MIPI LCD Card

Macnica Group announced release of its Mpression MIPI LCD Card. The card with a low power, high resolution TFT LCD connects with Altera FPGA based development boards through HSMC connectors. Macnica is starting to ship the card from August 2014. Macnica's Mpression MIPI LCD Card is a daughter card to evaluate FPGA designs using a display. Using this card, a designer can evaluate FPGA designs using high resolution LCD for various embedded applications very easily. The high resolution LCD from Ortus Technology features both the exceptional image quality and low power consumption users expect from today's advanced LCDs. These features are beneficial for applications requiring both low power and high image quality such as business handheld terminals, broadcasting/video equipment, medical equipment, and surveillance systems. The MIPI LCD Card is capable of accepting outside video and image stream from DVI port and converting the data to V-by-One HS to hand the data to the FPGA on the base board through the HSMC connector. After the data is processed in the FPGA using Northwest Logic's MIPI DSI IP, it is output to the HSMC connector, then to the TFT LCD via Meticom's MIPI D-PHY DSI transmitter IC.

Macnica, Inc., Annual General Meeting, Jun 26, 2014

Macnica, Inc., Annual General Meeting, Jun 26, 2014.

Macnica Group Announces the Release of its Mpression Nitro Board

Macnica Group announced release of its Mpression Nitro board using an Altera Cyclone V GX FPGA. It is useful for quickly prototyping FPGA-based multi-input/output applications in combination with various I/O daughter cards and 3 of its on-board HSMC expansion connectors. The Mpression Nitro board enables FPGA designers to accelerate Cyclone V GX based design and verification at minimum cost and time. Macnica starts to take orders for Mpression Nitro from the middle of June 2014 worldwide through local Macnica subsidiaries having an Altera franchise. Macnica's Nitro board has minimum components such as a Altera Cyclone V GX FPGA in the center, two DDR3 memories and clock ICs, and the three HSMC connectors to connect to any HSMC daughter cards either currently existing or newly created for functional differentiation. For example, using DDR3 as a frame buffer and combining daughter cards on the 3 connectors, can build various applications such as a video stream format converter among HDMI, DVI, SDI, DisplayPort, V-by-One(R), or a high speed packet data switch to PCI Express, Ethernet, USB3.0, etc.


Stock Quotes

Market data is delayed at least 15 minutes.

Company Lookup
Recently Viewed
7631:JP ¥3,320.00 JPY +60.00

7631 Competitors

Market data is delayed at least 15 minutes.

Company Last Change
No competitor information is available for 7631.
View Industry Companies

Industry Analysis


Industry Average

Valuation 7631 Industry Range
Price/Earnings 9.6x
Price/Sales 0.2x
Price/Book 0.8x
Price/Cash Flow 9.8x
TEV/Sales 0.1x

Sponsored Financial Commentaries

Sponsored Links

Report Data Issue

To contact MACNICA INC, please visit Company data is provided by Capital IQ. Please use this form to report any data issues.

Please enter your information in the following field(s):
Update Needed*

All data changes require verification from public sources. Please include the correct value or values and a source where we can verify.

Your requested update has been submitted

Our data partners will research the update request and update the information on this page if necessary. Research and follow-up could take several weeks. If you have questions, you can contact them at