Last $85.81 USD
Change Today +0.04 / 0.05%
Volume 79.7K
MEAS On Other Exchanges
Symbol
Exchange
Berlin
NASDAQ GS
As of 8:10 PM 09/18/14 All times are local (Market data is delayed by at least 15 minutes).

measurement specialties inc (MEAS) Snapshot

Open
$86.00
Previous Close
$85.77
Day High
$86.00
Day Low
$85.77
52 Week High
06/19/14 - $86.55
52 Week Low
09/19/13 - $50.66
Market Cap
1.4B
Average Volume 10 Days
108.9K
EPS TTM
$2.04
Shares Outstanding
16.2M
EX-Date
--
P/E TM
42.2x
Dividend
--
Dividend Yield
--
Current Stock Chart for MEASUREMENT SPECIALTIES INC (MEAS)

Related News

No related news articles were found.

measurement specialties inc (MEAS) Related Businessweek News

No Related Businessweek News Found

measurement specialties inc (MEAS) Details

Measurement Specialties, Inc. designs, develops, and manufactures sensors and sensor-based systems for original equipment manufacturers and end users. Its sensor products comprise pressure components, sensors, and transducers; load cells; linear variable differential transformers, rotary position transducers, and magneto-resistive sensors and magnetic encoders; long stroke linear displacement, magnetostrictive, and hi-rel rotary sensors; traffic and custom piezoelectric film sensors; accelerometers; relative humidity sensors; fluid monitoring sensors; thermistors and resistance temperature detectors; pulse oximetry and X-ray detection sensors; angular rate measurement sensors; and static and dynamic torque/force sensors. The company’s technologies comprise piezoresistive silicon, polymer and ceramic piezoelectric materials, application specific integrated circuits, micro-electromechanical systems, foil strain gauges, electromagnetic force balance systems, fluid capacitive sensors, linear and rotational variable differential transformers, anisotropic magneto-resistive devices, electromagnetic displacement sensors, hygroscopic capacitive structures, ultrasonic measurement systems, optical and infrared measurement systems, negative thermal coefficient ceramic sensors, 3-6 degree of freedom force/torque structures, complex mechanical resonators, magnetic reed switches, high frequency multipoint scanning algorithms, and high precision submersible hydrostatic level detection technologies. Its sensors are used for engine and vehicle, medical, general industrial, consumer and home appliance, military/aerospace, environmental water monitoring, and test and measurement applications. Measurement Specialties, Inc. sells its products under the MEAS brand name through regional sales managers, distributors, and outside sales representatives primarily in North America, Asia, and Western Europe. The company was founded in 1981 and is headquartered in Hampton, Virginia.

3,721 Employees
Last Reported Date: 06/3/14
Founded in 1981

measurement specialties inc (MEAS) Top Compensated Officers

Chief Executive Officer, President and Execut...
Total Annual Compensation: $522.9K
Chief Financial Officer, Principal Accounting...
Total Annual Compensation: $298.3K
Executive Vice President
Total Annual Compensation: $254.6K
Chief Technology Officer
Total Annual Compensation: $208.1K
Executive Officer
Total Annual Compensation: $239.2K
Compensation as of Fiscal Year 2014.

measurement specialties inc (MEAS) Key Developments

Measurement Specialties Inc. Now Offers the PT420

Measurement Specialties Inc. now offers the PT420, an absolute linear position sensor with full-scale measurement ranges from 2 inches to 100 inches. The sensor's two output signals, 2-wire 4-20 mA and 3-wire 0-20 mA, offer feedback signal linearly proportional to the position of the sensor's extension cable. The cable-actuated PT420 provides high accuracy and fine resolution without perfect parallel alignment for easy implementation. Multiple cable tension and electrical connection options, combined with the large full stroke ranges, provide designers with a flexible, high accuracy sensor developed for their requirements. The classic string pot design makes the sensor suitable for numerous industrial automation and testing applications. These include accurately measuring position on hydraulic cylinders found in factories and utilities as well as for proper gate position in fresh water or wastewater distribution systems and in valve opening for process-related applications. The PT420 uses a potentiometer that provides an essentially infinite output resolution. Repeatability is +/- 0.05% full stroke with an accuracy of +/- 0.15% full stroke for most ranges. The sensor operates from -40 degrees C to +90 degrees C and withstands 10 g of vibration to 2,000 Hz maximum. A simple dip-switch setting located on the internal signal board enables output signal direction to be reversed at any time. Users then just adjust the zero and span trimpots to ensure signal values match the beginning and end stroke points. Encased in an IP50 NEMA 1 rated anodized aluminum housing, the cable-actuated PT420 is less than 5 inches high when the stainless steel cable is retracted, and weighs less than 2 lbs. Technical specifications: Output signal options: 4 mA to 20 mA (2-wire) or 0 mA to 20 mA (3-wire); Repeatability of +/- 0.05% full stroke; Accuracy to +/- 0.15% full stroke for most ranges; Classic string pot design; Pricing and delivery is dependent upon quantity ordered.

Measurement Specialties Inc., Special/Extraordinary Shareholders Meeting, Aug 26, 2014

Measurement Specialties Inc., Special/Extraordinary Shareholders Meeting, Aug 26, 2014. Agenda: To approve the proposed acquisition of the company by TE Connectivity Ltd.

Measurement Specialties Inc. Announces Launch of U5300 Industrial Pressure Transducer

Measurement Specialties Inc. announced that it now offers the U5300, a industrial pressure transducer that features superior accuracy with a total error band (TEB) of +/-0.5% F.S. for demanding commercial and heavy duty applications. The compact unit offers maximum design flexibility with a variety of pressure ports and electrical configurations available for low to medium volume OEM applications. The U5300 accurately measures liquid or gas pressure in difficult media, such as contaminated water, steam and mildly corrosive fluids, in high end, high accuracy applications. These include military, aerospace and automotive test stands as well as calibration equipment, stationary motor fuel control and industrial machinery. Measurement Specialties' unique UltraStable technology enables the pressure transducer to provide excellent performance and long-term stability over an extended operating temperature range of -40 degrees C to +125 degrees C. Each unit's internal circuitry is protected from reverse wiring at input and short circuit at output for added reliability. The U5300 offers exceptional accuracy of +/-0.1% accuracy F.S. BFSL. Standard pressures range from 0 psi to 15 psi through 0 psi to 10,000 psi, with intermediate ranges available. This rugged pressure transducer can withstand shock to 50 g for 11 msec half sine per MIL-STD-202G as well as vibration of +/-20 g according to MIL-STD-810C. The weatherproof U5300 comes in gage, sealed, absolute or compound configurations, and exceeds current heavy industrial CE requirements, including surge protection. The durable device is made of 316L stainless steel, has no O-rings or welds and no organics are exposed.

 

Stock Quotes

Market data is delayed at least 15 minutes.

Company Lookup
Recently Viewed
MEAS:US $85.81 USD +0.04

MEAS Competitors

Market data is delayed at least 15 minutes.

Company Last Change
AAON Inc $18.65 USD +0.27
ESCO Technologies Inc $36.14 USD +0.13
Flotek Industries Inc $26.82 USD +0.28
Gorman-Rupp Co/The $31.86 USD +0.80
MTS Systems Corp $67.49 USD -0.01
View Industry Companies
 

Industry Analysis

MEAS

Industry Average

Valuation MEAS Industry Range
Price/Earnings 48.7x
Price/Sales 3.2x
Price/Book 4.0x
Price/Cash Flow 34.9x
TEV/Sales 2.6x
 | 

Sponsored Financial Commentaries

Sponsored Links

Report Data Issue

To contact MEASUREMENT SPECIALTIES INC, please visit www.meas-spec.com. Company data is provided by Capital IQ. Please use this form to report any data issues.

Please enter your information in the following field(s):
Update Needed*

All data changes require verification from public sources. Please include the correct value or values and a source where we can verify.

Your requested update has been submitted

Our data partners will research the update request and update the information on this page if necessary. Research and follow-up could take several weeks. If you have questions, you can contact them at bwwebmaster@businessweek.com.