Last $21.04 USD
Change Today +0.46 / 2.24%
Volume 580.9K
MENT On Other Exchanges
As of 8:10 PM 04/17/14 All times are local (Market data is delayed by at least 15 minutes).
text size: T | T
Back to Snapshot
Company Description

Contact Info

8005 SW Boeckman Road

Wilsonville, OR 97070

United States

Phone: 503-685-7000


Mentor Graphics Corporation provides electronic design automation (EDA) software and hardware solutions to automate the design, analysis, and testing of complex electro-mechanical systems, electronic hardware, and embedded systems software. The company markets its products and services worldwide, primarily to large companies in the communications, computer, consumer electronics, semiconductor, networking, multimedia, military and aerospace, and transportation industries. The electronic components and systems created with the company’s products include integrated circuits (ICs), printed circuit boards (PCBs), field programmable gate arrays (FPGAs), embedded software solutions, wire harness systems, and computers. Products The company’s product categories include Scalable Verification, IC Design to Silicon, Integrated System Design, New and Emerging Products, and Services and Other. Scalable Verification: The Mentor Graphics Scalable Verification tools allow engineers to verify that their complex IC designs function as intended. The Questa scalable verification platform includes support for hardware description languages, including System Verilog, simulation, and new verification methodologies including assertions and formal methods. The Questa platform is used for verification of systems and ICs including application-specific integrated circuits, system-on-chip (SoC), and FPGAs. Along with digital simulation products, the company offers analog/mixed-signal simulators. The company’s analog/mixed signal simulation products include the Eldo, ADVance MS, and ADiT tools. The company provides hardware emulation systems, such as its Veloce product family, which allow users to create functional and logical equivalent models of actual electronic circuits to verify the function and timing of those circuits. Its Veloce product allows customers to verify complex designs containing up to 1 billion logic gates. IC Design to Silicon The company offers the Calibre tool family, which is a standard for integrated device manufacturers and foundries: the Calibre physical verification tool suite, Calibre DRC and Calibre LVS, helps ensure that a particular IC layout corresponds to the original schematic or circuit diagram of the design and conforms to stringent manufacturing rules at wafer fabricators where ICs are manufactured. The Calibre xRC and xACT products, transistor-level extraction and device modeling tools, compute the values of detailed circuit parameters, including interconnect resistances, capacitances, and inductances to enable customers to simulate the performance of a design before it is manufactured. The Calibre lithography tools allow engineers to model, enhance, and verify layouts using lithography resolution enhancement techniques, including optical and process correction, phase-shift mask, scattering bars, and off-axis illumination. In the Design for Manufacturing (DFM) area, the Calibre LFD product can help customers produce higher yields at nanometer process geometries where variations in manufacturing can cause yield reductions. The Calibre CMPAnalyzer tool allows customers to model the expected planarity of ICs and identify where modifications to the layout would improve a chip’s flatness. The Calibre PERC tool checks the electrical design of an IC. It is useful in verifying the completeness of electrostatic discharge protection circuitry which affects both manufacturing yield and long-term reliability of an IC. The company also offers the Olympus-SoC place and route product targeted at customers designing ICs using geometries of 65 nm and below. The Olympus-SoC product addresses IC design challenges, such as manufacturing variability, design size and complexity, and low power requirements. The company’s Tessent suite of integrated silicon test products are used to test a design’s logic and memories after manufacturing to ensure that a manufactured IC is functioning correctly. The company’s suite of tools includes scan insertion, automatic test pattern generation, logic and memory built-in self-test, and its patented Tessent TestKompress product for EDT (Embedded Deterministic T

Page 12Next Page

Stock Quotes

Market data is delayed at least 15 minutes.

Company Lookup
Recently Viewed
MENT:US $21.04 USD +0.46

MENT Competitors

Market data is delayed at least 15 minutes.

Company Last Change
ANSYS Inc $75.81 USD +0.74
Cadence Design Systems Inc $14.86 USD +0.14
Cavium Inc $42.19 USD +0.49
Enea AB kr52.50 SEK 0.00
Sigma Designs Inc $4.16 USD +0.03
View Industry Companies

Industry Analysis


Industry Average

Valuation MENT Industry Range
Price/Earnings 16.3x
Price/Sales 2.1x
Price/Book 2.1x
Price/Cash Flow 14.7x
TEV/Sales 1.6x

Post a JobJobs

View all jobs

Sponsored Financial Commentaries

Sponsored Links

Report Data Issue

To contact MENTOR GRAPHICS CORP, please visit Company data is provided by Capital IQ. Please use this form to report any data issues.

Please enter your information in the following field(s):
Update Needed*

All data changes require verification from public sources. Please include the correct value or values and a source where we can verify.

Your requested update has been submitted

Our data partners will research the update request and update the information on this page if necessary. Research and follow-up could take several weeks. If you have questions, you can contact them at