Last $21.43 USD
Change Today +0.20 / 0.94%
Volume 528.3K
MENT On Other Exchanges
As of 4:00 PM 08/21/14 All times are local (Market data is delayed by at least 15 minutes).
text size: T | T
Back to Snapshot
Company Description

Contact Info

8005 SW Boeckman Road

Wilsonville, OR 97070

United States

Phone: 503-685-7000


re OPCverify tool is used to check and report the effectiveness of mask pattern corrections against wafer manufacturing specifications. The Calibre RET tools continue to be extended to provide computational patterning capabilities for process technology nodes from .13 micron to 7 nanometers. In the Design For Manufacturing (DFM) area, the Calibre LFD product can help customers produce higher yields at nanometer process geometries where variations in manufacturing can cause yield reductions. The Calibre CMPAnalyzer tool allows customers to model the expected planarity (i.e., thickness variation) of ICs and identify where modifications to the layout would improve a chip’s flatness. This helps prevent manufacturing defects and reduces variations in performance from one chip to the next. The Calibre MPCpro product is a solution for systematic errors introduced by e-beam lithography and mask etching processes built on Calibre OPCpro technology for optical process correction. The company’s Calibre nmMPC product provides optimizations specifically developed for e-beam mask writers. The Calibre PERC tool checks the electrical design of an IC. It is useful in verifying the completeness of electrostatic discharge protection circuitry, which affects both manufacturing yield and long-term reliability of an IC. The company also offers the Olympus-SoC place and route product targeted at customers designing ICs at advanced nodes.The Olympus-SoC place and route solution is a physical design implementation tool which performs design planning, placement, physical synthesis, clock tree synthesis, routing, power optimization, and manufacturability closure. The Olympus-SoC tool is architected to handle the complex multi-patterning and FinFET requirements at advanced process technologies. In December 2013, the company acquired the RealTime synthesis tool to bring register-transfer level (RTL) synthesis to its digital implementation flow. The RealTime solution helps SoC and application specific integrated circuit (ASIC) design teams to realize improved quality of results and faster turnaround time for complex SoCs, ASICs, and IP blocks. The RealTime tool’s placement first synthesis methodology and integrated RTL floorplanning capability enable physical backend issues to be analyzed and addressed at RTL stages before hand-off to the back-end groups for physical design implementation. The company’s Tessent suite of integrated silicon test products are used to test a design's logic and memories after manufacturing to ensure that a manufactured IC is functioning correctly. The company’s suite of tools includes scan insertion, boundary scan, automatic test pattern generation, logic and memory built-in self-test, and its patented Tessent TestKompress product for EDT. Integrated System Design The company’s PCB-FPGA Systems Design software products support the PCB design process from schematic entry, where the electronic circuit is defined by engineers, through physical layout of the PCB, and provide digital output data for manufacturing, assembly, and test. It has specific integrated software tool flows for process management, component library creation, simulation, and verification of the PCB design: The Xpedition Series product line is its principal PCB design family of products used by larger enterprise customers for PCB design flows from system design definition to manufacturing execution. The company’s HyperLynx product line offers a suite of analysis and verification software that meets the needs of PCB engineers at any point in the board design flow including tools for power integrity, thermal analysis, electromagnetic design/verification, analog simulation, and package modeling. The company also offers the ready to use PADS product line which provides a lower cost Windows-based PCB design and layout solution. The company’s I/O Designer product integrates FPGA input/output planning with its PCB design tools to help improve routing in large complex designs. The XtremePCB tool offers a method for simultaneous design where multiple designers can edit the same design at the same time and view each other’s edits i


Stock Quotes

Market data is delayed at least 15 minutes.

Company Lookup
Recently Viewed
MENT:US $21.43 USD +0.20

MENT Competitors

Market data is delayed at least 15 minutes.

Company Last Change
Cadence Design Systems Inc $17.70 USD +0.465
Cavium Inc $54.87 USD -0.14
Enea AB kr60.00 SEK +1.00
Nuance Communications Inc $16.86 USD -0.08
Sigma Designs Inc $4.49 USD 0.00
View Industry Companies

Industry Analysis


Industry Average

Valuation MENT Industry Range
Price/Earnings 16.7x
Price/Sales 2.1x
Price/Book 2.1x
Price/Cash Flow 14.9x
TEV/Sales 1.7x

Sponsored Financial Commentaries

Sponsored Links

Report Data Issue

To contact MENTOR GRAPHICS CORP, please visit Company data is provided by Capital IQ. Please use this form to report any data issues.

Please enter your information in the following field(s):
Update Needed*

All data changes require verification from public sources. Please include the correct value or values and a source where we can verify.

Your requested update has been submitted

Our data partners will research the update request and update the information on this page if necessary. Research and follow-up could take several weeks. If you have questions, you can contact them at