Last €17.58 EUR
Change Today +0.123 / 0.70%
Volume 165.0
SD5 On Other Exchanges
Symbol
Exchange
NASDAQ GS
Mexico
Frankfurt
As of 9:51 AM 08/29/14 All times are local (Market data is delayed by at least 15 minutes).
text size: T | T
Back to Snapshot
Company Description

Contact Info

7575 West Jefferson Boulevard

Fort Wayne, IN 46804

United States

Phone: 260-969-3500

Fax: 260-969-3590

Steel Dynamics, Inc. engages in the manufacture and sale of steel products; processing and sale of recycled ferrous and nonferrous metals; and fabrication and sale of steel joist and decking products in the United States. The company has an estimated annual steelmaking capability of 6.4 million tons. Segments The company operates through three segments: Steel Operations; Metals Recycling and Ferrous Resources Operations; and Steel Fabrication Operations. STEEL OPERATIONS This segment consists of steelmaking and coating operations. This segment consist of the company’s five electric-arc furnace mini-mills, producing steel from steel scrap, utilizing casting, automated rolling mills, and various downstream finishing facilities. The company’s steel operations sell directly to end users and service centers. These products are used in various industry sectors, including the automotive, agriculture, construction, commercial, transportation, energy, and industrial machinery markets. Sheet Products The company’s sheet steel products are produced by both its Flat Roll Division, which consists of its flat roll mill, galvanizing and painting facilities in Butler, Indiana; galvanizing and painting facilities in Jeffersonville, Indiana; and The Techs, its Pittsburgh, Pennsylvania-based galvanizing company, which operates three galvanizing facilities: GalvTech, MetalTech, and NexTech. The company’s Flat Roll Division manufactures flat hot rolled, cold rolled and coated steel products. The company produced 3.0 million tons at this division in 2013. The company’s flat roll mill has two twin-shell electric arc furnaces, which enable it to melt scrap in one vessel while tapping the other vessel and refilling it with steel scrap and iron units to make it ready for the next heat. The company has three ladle metallurgy stations, two continuous thin-slab casters, and two tunnel furnaces. Its hot rolling mill, which progressively reduces the slab in thickness, consists of a seven-stand rolling mill capable of rolling sheet steel down to 1.0 mm. Located within its flat roll mill, the company has a hot rolled galvanizing line capable of coating steel in gauges from .044 to .160 inches and in widths ranging from 40 to 61 inches. Also within its flat roll mill, the company has a cold rolled galvanizing line capable of coating steel in gauges from .012 to .070 inches and in widths ranging from 40 to 61 inches. The company’s on-site paint line receives material directly from its other processing lines and is capable of painting hot rolled galvanized coil, cold rolled coil and cold rolled galvanized coil in gauges of .012 to .070 inches and in widths ranging from 40 to 61 inches. In Jeffersonville, Indiana, the company has a cold rolled galvanizing facility located within the Clark Maritime Centre on the Ohio River. This facility is capable of coating cold rolled steel in gauges from .012 to .040 inches and in widths between 40 and 61 inches. This gauge range is lighter than that available from the company’s Butler facility and creates further expansion of its value added product offerings. The company’s flat roll mill provides its Jeffersonville facility with cold rolled material. The Techs facilities produced 671,000 tons in 2013. The Techs facilities have galvanizing lines with varying capabilities. NexTech is capable of coating cold rolled steel in gauges from .007 to .020 inches and in widths between 24 and 43 inches. GalvTech is capable of coating cold rolled steel in gauges from .012 to .040 inches and in widths between 30 and 60 inches. MetalTech is capable of coating cold rolled steel in gauges from .015 to .160 inches and in widths between 24 and 52 inches. In addition to third party steel producers, the company’s Flat Roll Division provides The Techs with required steel material. Hot Rolled Products The company’s flat roll mill produces hot rolled products that include various low and medium carbon and high-strength low-alloy hot rolled bands in widths from 40 to 62 inches and in thicknesses from .375 inches down to .042 inches. The company also produces a range of lighter gauge hot rolled products, inclu

 

Stock Quotes

Market data is delayed at least 15 minutes.

Company Lookup
Recently Viewed
SD5:GR €17.58 EUR +0.123

SD5 Competitors

Market data is delayed at least 15 minutes.

Company Last Change
Allegheny Technologies Inc $42.17 USD +0.14
Kennametal Inc $44.81 USD +0.14
Reliance Steel & Aluminum Co $69.92 USD +0.12
Sims Metal Management Ltd A$12.04 AUD +0.06
Timken Co/The $45.29 USD -0.08
View Industry Companies
 

Industry Analysis

SD5

Industry Average

Valuation SD5 Industry Range
Price/Earnings 25.1x
Price/Sales 0.7x
Price/Book 1.9x
Price/Cash Flow 22.1x
TEV/Sales 0.4x
 | 

Sponsored Financial Commentaries

Sponsored Links

Report Data Issue

To contact STEEL DYNAMICS INC, please visit www.steeldynamics.com. Company data is provided by Capital IQ. Please use this form to report any data issues.

Please enter your information in the following field(s):
Update Needed*

All data changes require verification from public sources. Please include the correct value or values and a source where we can verify.

Your requested update has been submitted

Our data partners will research the update request and update the information on this page if necessary. Research and follow-up could take several weeks. If you have questions, you can contact them at bwwebmaster@businessweek.com.